1
Vote

VC709-released error in reset signal

description

The HBA reset signal is link_reset = soft_reset | hard_reset and it is the reset signal to the link.v
The link.v module generates the reset signal to the transport.v - reset_from_link. This signal is set in the state HOST_COMRESET and it is never cleared. This means that the transport layer is always in reset state. This could be seen in xsim.

I am porting the core to the KC705 and I wonder why the author did not use the same reset for all the modules or, why that signal has not been cleared after the state HOST_COMRESET.

Regards,
Victor

comments